KV-S5076H, KV-S5046H - Panasonic Other Service Manuals Service Manual (repair manual). Page 10

10

Name

Operation

1

Skip button (SKIP) If you press this button after a double feed or a dog-eared document is detected and scanning has been paused,

the document that was detected as a double feed or the dog-eared document will be scanned, and then ejected
from the scanner. Scanning will continue after the document is scanned and ejected.

2

LED (Green)

Shows the scanner’s status.

3

Power button

Press the power button for more than one second to turn the unit off.

4

LCD
(KV-S5076H only)

If you are using a KV-S5076H with Image Capture Plus, you can perform push scan using the LCD.
Registered jobs are displayed on the LCD. Use the cursor button and OK button to select a job.
Also, error codes and messages corresponding to the scanner status are displayed on the LCD.

5

Cursor button
(KV-S5076H only)

6

OK button
(KV-S5076H only)

7

Start/Stop button
(START/STOP)

(1) If you set [Wait Key] for "Manual Feed Mode" in your application software, pushing this button starts 
      scanning.
(2) During scanning, pushing this button stops scanning.
(3) If you press this button after a double feed or a dog-eared document is detected and scanning has been
     paused, the document that was detected as a double feed or the dog-eared document will be ejected from 
     the scanner without being scanned. Scanning will stop.

8

LED (Red)

Lights when an error occurs.

LED (Green)

LED (Red)

Status

OFF

OFF

Power OFF

ON

OFF

Ready mode or Scanning

Blinking (Slow)

OFF

Sleep mode

OFF

ON

Error

Blinking (Fast)

OFF

Warming up

Blinking (Fast, 2 times consecutively)

OFF

Double Feed Skip mode

Blinking (Fast, 3 times consecutively)

OFF

Dog-ear Detection Skip mode