Read Panasonic KV-S5055C (serv.man4) Service Manual Supplement online
9
Note
*1
: This item is available only if the optional Imprinter is installed to the scanner.
*2
: These items are also available in User Utility software.
*3
: This setting is needed when replacing CONTROL Board or IC0004.
Test
LED
Used to periodically light the indicators on the front cover
5
Key / Sensor
Used to do keys' or sensors' ON/OFF test
5
Sensor Sensitive Level
Used to check the status (Offset level, Slice level) of each Sensor
(Waiting, Slip Detect, Starting, Exit)
(Waiting, Slip Detect, Starting, Exit)
5
Feed Motor
Used to check the operation of the motor periodically rotating in
the paper-feed direction and its reverse direction
Note:
the paper-feed direction and its reverse direction
Note:
• Rotating in the paper-feed direction will allow the Paper
Feed Roller Module to go down to perform the paper-feed
function.
• Rotating in the reverse direction will allow the Paper Feed
Roller Module to rise to perform the paper-separation
function.
Feed Roller Module to go down to perform the paper-feed
function.
• Rotating in the reverse direction will allow the Paper Feed
Roller Module to rise to perform the paper-separation
function.
5
Conveyor Motor
Used to check Conveyor Motor rotation
5
DFP Pressure Drive
Used to check DFP Pressure Motor rotation
5
Gate Drive
Used to check the open/close operation of the gate by rotating
the Conveyor Motor in the paper-feed direction or its reverse
direction.
the Conveyor Motor in the paper-feed direction or its reverse
direction.
5
Feed
Used to check paper feed condition
5
Sleep Mode
1. Used to check whether the sleep mode function works properly
2. Used to check whether the Standby mode function
works properly
works properly
5
CCD Level
Used to check the peak output-level after setting CCD lighting
level on each side
level on each side
5
Image Sensor Output
Used to check whether CCD operates normally by outputting the
CCD's output level or whether a dust is attached on the Scanning
Glass
CCD's output level or whether a dust is attached on the Scanning
Glass
5
Double Feed
Used to check the level of the Double Feed Detector (R)
(Response level) after setting the ultrasonic emission level of the
Double Feed Detector (G)
(Response level) after setting the ultrasonic emission level of the
Double Feed Detector (G)
5
Memory
Used to execute memory R/W test
5
Ionizer
Used to check whether ON/OFF (Enable/Disable) control to
output Ionizer properly operates.
output Ionizer properly operates.
5
Adjust
Shading
Used to execute shading correction
4
All Position
Used to adjust scanning length, paper end position, width,
vertical position, and horizontal position adjustment for front and
back sides automatically
vertical position, and horizontal position adjustment for front and
back sides automatically
4
Individual Position
1. Used to execute automatic length, paper end position, width,
vertical position, or horizontal position adjustment for front and
back sides, individually
2. Used to adjust scanning length, paper end position, width,
vertical position, or horizontal position for front and back sides
manually
vertical position, or horizontal position adjustment for front and
back sides, individually
2. Used to adjust scanning length, paper end position, width,
vertical position, or horizontal position for front and back sides
manually
4
Double Feed
Used to correct the Double Feed Detector’s ultrasonic emission
level automatically or manually
level automatically or manually
4
Bent Paper Sensor
Used to correct the Bent Paper Sensor’s sending level
automatically or manually
automatically or manually
4
USB ID
*3
Used to set a USB ID for the scanner, connected to the PC
3
Feed Speed
Used to change the paper feed speed
3
Other
Save Information
*2
Used to save the scanner and PC information
1
Download the latest version Click “Download the latest version” to open the site
for Panasonic scanner products that provides the
scanner software to be downloaded.
scanner software to be downloaded.
6
Save Log
Click “Save Log” to open “Save As” dialog-box.
Then after renaming a log file, perform “Save” to save
it.
Then after renaming a log file, perform “Save” to save
it.
6
Item
Purpose
Remarks
Click on the first or last page to see other KV-S5055C (serv.man4) service manuals if exist.