Read Panasonic KV-S4065CL / KV-S4065CW / KV-S4065CWCN / KV-S4085CL / KV-S4085CW / KV-S4085CWCN Service Manual online
22
6.2.
Paper Feed Mechanism-2 (In case of scanning thick paper on the Auto-
Feed mode)
Feed mode)
1. When documents are set on the Hopper and the scanning command is issued from PC, the Hopper rises and the
documents are brought into contact with Paper Feed Roller.
documents are brought into contact with Paper Feed Roller.
2. The Conveyor Motor is driven to rotate the 5 Drive Rollers (Drive Rollers 1 to 5) and the Exit Roller.
3. When the Paper Feed Motor and Separation Motor start, the Paper Feed Roller and the Separation Roller turn
in the feed direction.
The DFP Roller is supported by a shaft fixed via a torque limiter, and it is pushed against the Separation Roller.
When the document enters the separation section, the DFP Roller exerts a manipulation force onto the
documents, which depends on the set torque. In case of continuous paper feed, the documents are separated
by this manipulation force, and so only a document is fed to the scanning section.
3. When the Paper Feed Motor and Separation Motor start, the Paper Feed Roller and the Separation Roller turn
in the feed direction.
The DFP Roller is supported by a shaft fixed via a torque limiter, and it is pushed against the Separation Roller.
When the document enters the separation section, the DFP Roller exerts a manipulation force onto the
documents, which depends on the set torque. In case of continuous paper feed, the documents are separated
by this manipulation force, and so only a document is fed to the scanning section.
4. When the leading edge of the document passes through the Drive Roller 1, the Paper Feed Motor and Separation
Motor stop, and then the Paper Feed Roller and Separation Roller are turned by the advancing document.
Motor stop, and then the Paper Feed Roller and Separation Roller are turned by the advancing document.
5. When the leading edge of the document passes through the Starting Sensor, image scanning starts after the defined
period. (i.e.,: the time required for the document to advance from the Starting Sensor to the scanning start point.)
period. (i.e.,: the time required for the document to advance from the Starting Sensor to the scanning start point.)
6. When the heeling edge of the document comes to the defined position from the Waiting Sensor, the Paper Feed Motor and
Separation Motor are driven again to feed the 2nd document.
Separation Motor are driven again to feed the 2nd document.
7. Steps 3 to 6 are repeated.
8. After all documents have been scanned, the Hopper returns to its original position and the scanning sequence ends.
Note:
When the scanner’s buffer becomes full, the scanner stops to prevent buffer overflow, while allowing the data
to be transferred to the PC continuously. When enough free buffer area is secured again, the scanner
resumes the scanning process.
to be transferred to the PC continuously. When enough free buffer area is secured again, the scanner
resumes the scanning process.
Click on the first or last page to see other KV-S4065CL / KV-S4065CW / KV-S4065CWCN / KV-S4085CL / KV-S4085CW / KV-S4085CWCN service manuals if exist.