KV-S4065CL, KV-S4065CW, KV-S4065CWCN, KV-S4085CL, KV-S4085CW, KV-S4085CWCN (serv.man2) - Panasonic Other Service Manuals Service Manual Supplement (repair manual). Page 8

8

Shading

1. Click “Shading” on the main menu.
2. Confirm the message “The data of User Shading will be
    also overwritten” on the display.
    And if the message is acceptable, click “OK”.
     Note:

3. Clean the conveyor, rollers, and Image Sensor Cover
     according to the message on the display.
    And click “OK”.
4. Switch Reference Plates to white according to the message
    on the display.
    And click “OK”.
5. Set the accessory Shading Paper or Shading Paper
   (Part No.: See 14.6.) on the Hopper Tray in landscape
    orientation.
6. And click “OK” to scan the Shading Paper.
7. Switch the Reference Plates to black according to the
    message on the display.
8. Click “OK” to return to the main menu.

—

Until this process is
completed, don’t stop the
process by opening any
doors or turning off the
scanner. 

All Position

1. Set 2 pcs of test chart A (Part No.: See 14.6.) on the Hopper
    Tray in portrait orientation.
2. Click “All position” on the main menu to execute scanning
    position and length adjustment. 
3. Check the result.
4. Click “OK” to return to the main menu.

—

Set 2 pcs of test chart A in
order.
 1st page: Front side
 2nd page: Back side

Individual Position 1. Adjust Automatically.

    a. Set test chart A (Part No.: See 14.6.) on the Hopper Tray.
    b. Click “Individual Position” on the main menu.
    c. Click one of 5 “Adjust Automatically” buttons on the
        “Individual Position” dialog box to execute the
        adjustment.
    d. Check the result.
    e. Click “OK” to finish the adjustment.
     f. Click “OK” to return to the main menu.

2. Adjust Manually.
    a. Click “Individual Position” on the main menu.
    b. Change the parameter (mm, %) on the “Individual
        Position” dialog box as required. (Refer to Remarks.)
    c. Click “OK” to renew the setting, and to return to the
        main menu.  

—

1. Adjust Automatically
   5 automatic adjustment
     a. Adjust Length
     b. Adjust Front V. Position
     c. Adjust Front H. Position
     d. Adjust Back V. Position
     e. Adjust Back H. Position
 
2. Adjust Manually
   (Length)
    +: Increasing the number
        makes the scanning
        document length
        

shorter.

  (Vertical Position)
     +: Increasing the number
         makes the document
         scanning position shifted
         

(Horizontal Position)
     +: Increasing the number
         makes the document
         scanning position shifted
         to the 

.