Read Panasonic KV-S3065CL / KV-S3065CW (serv.man4) Service Manual online
Error Code
Possible Cause
Check Point
Remarks
Classified Code
ST1
ST2
ST3
ST4
F60
(Front side gain
adjustment error)
(Front side gain
adjustment error)
50
00
00
00
1. Image Sensor Cover (F) is dirty.
Clean the cover surface. (See 7.2.)
2. CIS (F) lamp does not light.
1.
Execute CIS Level test in Sec.9.3.6 to
check the peak level.
check the peak level.
2.
Check the following connection and
soldering condition on each connector.
soldering condition on each connector.
a.
CIS (F) to Lamp Drive (F) Board
b.
Lamp Drive (F) Board to CN5034
(POWER RELAY Board)
(POWER RELAY Board)
c.
CN5032 (POWER RELAY Board) to
CN1012 (CONTROL Board)
CN1012 (CONTROL Board)
d.
CN5001 (POWER RELAY Board) to
CN4005 (DRIVE Board)
CN4005 (DRIVE Board)
e.
CN4003 (DRIVE Board) to CN802
(POWER Board)
(POWER Board)
3.
Check the lamp control signals to the CIS
(F)
(F)
→ CN5034-1
st
pin: 24 V
→ CN5034-2
nd
pin: 5 V
(When lamp is ON)
4.
Replace faulty parts or boards.
3. Pixel data from CIS (F) or image
processing circuit have some
problems.
processing circuit have some
problems.
1.
Check the following connection and
soldering condition on each connector.
soldering condition on each connector.
a.
CIS (F) to CN3002 (CIS (F) RELAY
Board): Only for KV-S3065CW
Series
Board): Only for KV-S3065CW
Series
b.
CIS (F) to CN3003 (CIS (F) RELAY
Board): Only for KV-S3065CL Series
Board): Only for KV-S3065CL Series
c.
CN3001 (CIS (F) RELAY Board) to
CN1003 (CONTROL Board)
CN1003 (CONTROL Board)
d.
CN3000 (CIS (F) RELAY Board) to
CN1002 (CONTROL Board)
CN1002 (CONTROL Board)
e.
CN1000 (CONTROL Board) to
CN2000 (INTERFACE Board)
CN2000 (INTERFACE Board)
2.
Check the following CIS timing signals on
the CIS (F) RELAY Board are normal.
the CIS (F) RELAY Board are normal.
→ CN3002-34
th
, 35
th
pins: 5 MHz
: Only for KV-S3065CW Series
→ CN3003-28
th
, 29
th
pins: 5 MHz
: Only for KV-S3065CL Series
3.
Check the soldering condition of the
IC1010, IC1011, IC1024, and their
surrounding circuit on the CONTROL
Board.
IC1010, IC1011, IC1024, and their
surrounding circuit on the CONTROL
Board.
4.
Check the soldering condition of the
IC1006, IC1007, and their surrounding
circuit on the CONTROL Board.
IC1006, IC1007, and their surrounding
circuit on the CONTROL Board.
5.
Check the soldering condition of the
IC2045 and its surrounding circuit on the
INTERFACE Board.
IC2045 and its surrounding circuit on the
INTERFACE Board.
6.
Replace faulty parts or boards.
123
KV-S3065CLSERIES / KV-S3065CWSERIES
Click on the first or last page to see other KV-S3065CL / KV-S3065CW (serv.man4) service manuals if exist.