KV-S2087 (serv.man2) - Panasonic Other Service Manuals Service Manual Supplement (repair manual). Page 2

2

Suffix

Reason for suffix change

E to D

Change E-Ring to Polyslider.(Cancel the change instruction from Poly Slider to E-Ring which is issued supplement-2).

Suffix

Reason for suffix change

G to H

Change the mounting a feed drive shaft.(Suffix has already changed to G by other contents (Suffix F is not used).

H to G

Change E-Ring to Polyslider.(Cancel the change instruction from Poly Slider to E-Ring which is issued supplement-2).

Suffix

Reason for suffix change

C to B

Change E-Ring to Polyslider.(Cancel the change instruction from Poly Slider to E-Ring which is issued supplement-2).

Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance

Remarks:
*1:Change the color Black to Gray.

2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other

Interchangeability Code

Parts

Set Production

A Original

New

Early (before change)
Late (after change)

Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.

B Original

New

Early (before change)
Late (after change)

Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.

C Original

New

Early (before change)
Late (after change)

New parts only may be used in early or late production sets.
Stock new parts.

D Original

New

Early (before change)
Late (after change)

Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.

E

Addition

F

Deletion

G

Other

Ref. No.

Part No.

Part Name & Description

Pcs

Remarks

Time of change (Suffix)

Original (Old)

-M/-B

-U

-CN/-J

Feed Tray
203

PNHR2230Z

Document Guide Sub R

1

*1

8

C

Sub Chassis
418

PNDF1184Z

Feed Drive shaft

1

7

---

H

491

------

E-Ring

1

7

---

H

411

------

Poryslider

1

5

---

D

G

B

491

XUC4FJP

E-Ring

1

6

---

D

G

B

482

PNZUS20870M

Reference Plate (B)

1

8

B

492

------

Paper Feed Roller Assy

1

5

---

Main Chassis 1
526

PNZUS20870M

Reference Plate (F)

1

8

B