Read Panasonic KV-S2048C Service Manual online
16
7 MAINTENANCE
7.1.
Maintenance Chart
C: Clean R:Replace (x 1000 sheets)
Note
• The above roller maintenance values are registered in the maintenance counter (Refer to Sec. 9), and the PC
will inform users the cleaning or replacing timing if the utility software in this scanner has been already installed.
• The maintenance schedule was determined according to paper standards (A4: 80 g/m
2
/ Letter: 20 lb.), which can
vary greatly between users. Therefore, the values can also vary
7.2.
Cleaning
When cleaning rollers and CIS Sec. 7.2.1. mentions, the accessory Roller Cleaning Paper or KV-SS03 Option (Roller Cleaning
Paper) is needed.
Note
Paper) is needed.
Note
1. Roller Cleaning Paper
• Open the bag on the dotted line and take out the Roller Cleaning Paper.
• If the opened bag is left open for a long period of time before using it, the alcohol will evaporate. Please use the
Roller Cleaning Paper immediately after opening the bag.
• The Roller Cleaning Paper (KV-SS03 Option) is available via sales route.
2. If the ADF Door does not open even with ADF Door Release pushed repeatedly, there is a possibility that the door is
not latched. In this case, try to close the ADF Door until it clicks into place.
Description
Part Reference
Section
20
40
60
80 - 260
280 300
Paper Feed Roller
Sec.14.3
C
C
C
Clean each part every 20 (x
1000) sheets'
scanning.
1000) sheets'
scanning.
C
R
Separation Roller
Sec.14.3
C
C
C
C
R
Double-feed Prevention Roller (Retard Roller)
Sec.14.1
C
C
C
C
R
Drive Roller 1
Sec.14.2
C
C
C
C
C
Drive Roller 2
Sec.14.2
C
C
C
C
C
Drive Roller 3
Sec.14.2
C
C
C
C
C
Exit Roller
Sec.14.2
C
C
C
C
C
CIS
For front side Sec.14.3
C
C
C
C
C
For back side Sec.14.2
C
C
C
C
C
Sensor Roller
For front side Sec.14.2
C
C
C
C
R
For back side Sec.14.3
C
C
C
C
R
Paper Release Roller
Sec.14.1
C
C
C
C
C
Free Roller
Sec.14.3
C
C
C
C
C
Paper Detector (Sensor)
Sec.14.1
C
C
C
C
C
Waiting Sensor (Board)
Sec.14.3
C
C
C
C
C
Starting Position Sensor (Board)
Sec.14.3
C
C
C
C
C
Ending Sensor (Board)
Sec.14.2
C
C
C
C
C
Reflector (Mirror) Sheet for Waiting Position
Sensor
Sensor
Sec.14.2
C
C
C
C
C
Reflector (Mirror) Sheet for Starting Position
Sensor
Sensor
Sec.14.2
C
C
C
C
C
Reflector (Mirror) Sheet for Ending Sensor
Sec.14.1
C
C
C
C
C
Double Feed Detector (G) (Board)
Sec.14.2
C
C
C
C
C
Double Feed Detector (R) (Board)
Sec.14.3
C
C
C
C
C
Click on the first or last page to see other KV-S2048C service manuals if exist.