Read Panasonic KV-S1058Y / KV-S1028Y / KV-S1057C-M2 / KV-S1057C-J2 / KV-S1027C-M2 / KV-S1027C-J2 Service Manual online
24
5. When the trailing edge of the document passes through the separation section, the continuous rotation of the Paper Feed
Roller during scanning, enables the next document to be fed.
(A difference in the rotation speeds of the Conveyor Roller and Paper Feed Roller creates a distance between the1st
document and the 2nd.)
(A difference in the rotation speeds of the Conveyor Roller and Paper Feed Roller creates a distance between the1st
document and the 2nd.)
6. The steps 2 to 5 above are repeated.
7. When the Paper Sensor detects no further documents, and the Starting Sensor detects the trailing edge of the document, the
7. When the Paper Sensor detects no further documents, and the Starting Sensor detects the trailing edge of the document, the
Conveyor Motor will stop rotating after a certain period of time determined by the scanner to end the scanning sequence.
8. After the conveyor motor stopped, by opposite rotation of the Conveyor Motor, the Document Stage is moved up and the
Gates are closed.
Note:
When the scanner’s buffer becomes full, the scanner stops to prevent buffer overflow, while allowing the data to be
transferred to the PC continuously. When enough free buffer space is secured again, the scanner resumes the
scanning process.
transferred to the PC continuously. When enough free buffer space is secured again, the scanner resumes the
scanning process.
7.2.
Paper Feed Mechanism (Manual)
Manual feed selector
DFP Release Cum
DFP Holder
1
Paper Feed Roller
DFP Roller
2
3
When scanning bound paper with the Manual Feed Selector set to "AUTO" the DFP Roller is pressed against the Paper Feed
Roller, and this results in a separating force being applied to the document, which will separate the layers, resulting in damage to
the document.
This problem can be avoided by scanning bound paper with the Manual Feed Selector set to "MANUAL".
With "MANUAL" set, the DFP Roller is released from the Paper Feed Roller and so bound paper can be fed and scanned as
if it were a single sheet of paper.
Roller, and this results in a separating force being applied to the document, which will separate the layers, resulting in damage to
the document.
This problem can be avoided by scanning bound paper with the Manual Feed Selector set to "MANUAL".
With "MANUAL" set, the DFP Roller is released from the Paper Feed Roller and so bound paper can be fed and scanned as
if it were a single sheet of paper.
Auto Mode
Manual Mode
1. The Manual feed selector is changed to Manual.
2. The DFP Release Cum pushes the DFP Holder.
3. The holder is moved up and the DFP Roller is released from the Paper Feed Roller.
2. The DFP Release Cum pushes the DFP Holder.
3. The holder is moved up and the DFP Roller is released from the Paper Feed Roller.
Note:
Do not scan bound paper with the Manual Feed Selector set to "AUTO".
When scanning bound paper, be sure the Manual Feed Selector is set to "MANUAL".
Do not scan bound paper with the Manual Feed Selector set to "AUTO".
When scanning bound paper, be sure the Manual Feed Selector is set to "MANUAL".
Click on the first or last page to see other KV-S1058Y / KV-S1028Y / KV-S1057C-M2 / KV-S1057C-J2 / KV-S1027C-M2 / KV-S1027C-J2 service manuals if exist.