Read Panasonic KV-S1058Y / KV-S1028Y / KV-S1057C-M2 / KV-S1057C-J2 / KV-S1027C-M2 / KV-S1027C-J2 (serv.man3) Service Manual Supplement online
4
KV-S1058Y/KV-S1028Y/KV-S1057C-M2/J2/KV-S1027C-M/J2
1.3.
Lower Chassis 2
1.3.1.
Bottom Plate
1.3.2.
Platen Motor
(1) Remove the Back Cover.
(See 8.2.5. Back Cover)
(2) Remove the screw A and the USB Earth Plate with the wire.
(3) Remove the 7 screws C.
(4) Remove the 2 screws F.
(5) Remove the Bottom Plate.
(3) Remove the 7 screws C.
(4) Remove the 2 screws F.
(5) Remove the Bottom Plate.
Reassembling Note:
Install the Bottom Plate with screws C and F first and then
install the USB Earth Plate and wire with screw A.
Otherwise the USB Earth Plate may not contact with the
USB jack on the Control Board correctly.
install the USB Earth Plate and wire with screw A.
Otherwise the USB Earth Plate may not contact with the
USB jack on the Control Board correctly.
While slanting the Bottom Plate, insert it into the hole.
(1) Remove the Bottom Plate.
(see 8.5.1 Bottom Plate)
(2) Remove the CONTROL Board.
(see 8.5.5. CONTROL Board)
(3) Remove the Polyslider and Gear.
(4) Remove the screw C.
(5) Remove the Platen Motor with Motor Plate.
(6) Remove the 2 screws G and remove the Platen Motor from
(4) Remove the screw C.
(5) Remove the Platen Motor with Motor Plate.
(6) Remove the 2 screws G and remove the Platen Motor from
the plate.
(7) Disconnect the connector.
Reassembling Note:
Check the mounting position of the gear.
(See 8.4.3. Reference Plate (B))
Hole
Bottom Plate
Bottom Plate
FFC
Harness
F
A
USB Earth Plate
Bottom Plate
C
Hole
Control Board
C
Platen Motor
G
Motor Plate
G
Gear
Polyslider
Connector
Click on the first or last page to see other KV-S1058Y / KV-S1028Y / KV-S1057C-M2 / KV-S1057C-J2 / KV-S1027C-M2 / KV-S1027C-J2 (serv.man3) service manuals if exist.