Read Panasonic KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y Service Manual online
65
4. Problem with Pixel data from
CIS (F) or from image
processing circuit.
processing circuit.
*KV-N1028Y/X: CN2
**KV-N1028Y/X : IC2
**KV-N1028Y/X : IC2
1. Check the connection and soldering condition of
the following parts.
Between CIS (F) and CN1*(CONTROL Board)
Between CIS (F) and CN1*(CONTROL Board)
2. Check the soldering condition of the following parts
and of their surrounding circuits on the CONTROL
Board.
(1) IC9 (PF4)
(2) IC1** (AFE)
(3) IC4 (D/A Conv.)
Board.
(1) IC9 (PF4)
(2) IC1** (AFE)
(3) IC4 (D/A Conv.)
3. Monitor the following CIS Timing signals on the
CN1*.
(1) FCLK (CN1*-5th pin) : See
(1) FCLK (CN1*-5th pin) : See
Fig.11.2.1.
(2) FSP (CN1*-7th pin) : See
Fig.11.2.2.
4. Replace faulty parts or boards.
F61: Front-side
black level error
black level error
51
00
00
00 1. Problem with Pixel data from
CIS (F) or from image
processing circuit.
processing circuit.
Refer to F60 - 4.
F62: Back-side
gain adjustment
error
gain adjustment
error
52
00
00
00 1. The surface of Scanning
Glass (B) is dirty.
1. Clean the surface with a soft and dry cloth.
2. CIS (B) Unit does not work
properly.
*KV-N1028Y/X : CN4
1. Execute "Focus" test in Sec.
10.3.8.
to check the
waveform of CIS output.
2. Execute "CIS LED" test in Sec.
10.3.8.
to check the
lighting of each RGB.
3. Check the following connections and soldering
condition on each connector.
CIS (B) Unit to CN3* (CONTROL Board)
CIS (B) Unit to CN3* (CONTROL Board)
4. Check the power supply for LED.
(1) CN3*-4th pin, F1: 7.0 V
(2) L8, L9, L10, Q9, Q10, Q12
(2) L8, L9, L10, Q9, Q10, Q12
5. Replace faulty parts or boards.
3. Background Plate (B)
switching is not working
properly.
properly.
1. Execute "Focus" test in Sec.
10.3.8.
to check the
peak level when Background Color is White and
Black.
Black.
4. Problem with Pixel data from
CIS (B) or from image
processing circuit.
processing circuit.
*KV-N1028Y/X : CN4
1. Check the connection and soldering condition of
the following parts.
Between CIS (B) and CN3* (CONTROL Board)
Between CIS (B) and CN3* (CONTROL Board)
2. Check the soldering condition of the following parts
and of their surrounding circuits on the CONTROL
Board.
(1) IC9 (PF4)
(2) IC2 (AFE)
(3) IC4 (D/A Conv.)
Board.
(1) IC9 (PF4)
(2) IC2 (AFE)
(3) IC4 (D/A Conv.)
3. Monitor the following CIS Timing signals on the
CN3*.
(1) BCLK (CN3*-5th pin) : See
(1) BCLK (CN3*-5th pin) : See
Fig.11.2.1.
(2) BSP (CN3*-7th pin) : See
Fig.11.2.2.
4. Replace faulty parts or boards.
F63: Back-side
black level error
black level error
53
00
00
00 1. Problem with Pixel data from
CIS (B) or from image
processing circuit.
processing circuit.
Refer to F62 - 4.
F80: Double
Feed Detector
error
Feed Detector
error
60
00
00
00 1. Double Feed Detector
(Generate) does not work
properly.
properly.
Refer to U23 - 5.
2. Double Feed Detector
(Receive) does not work
properly.
properly.
Refer to U23 - 6.
F82: DAC
control status
error
control status
error
63
00
00
00 1. No reply from DAC IC.
1. Check the soldering condition of CONTROL Board
and its surrounding parts of IC4.
2. Replace faulty parts or boards.
F90: Sub-
processor error
processor error
9E
XX
XX
XX 1. Sub-processor error of
ASIC.
1. Check the soldering condition of CONTROL Board
and its surrounding parts of IC9.
2. Replace faulty parts or boards.
Error Code
ST1 ST2 ST3 ST4
Possible Cause
Recommended action
Click on the first or last page to see other KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y service manuals if exist.