Read Panasonic KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y Service Manual online
54
Double feed
1. Set the Shading Sheet (Part No.: PNQE1093Z-J) on the Feed
Tray, sliding the Document Guides so that they match the
document width.
document width.
2. Click "Double feed" on the adjust menu.
3. Click "Adjust Automatically" to adjust the double feed
3. Click "Adjust Automatically" to adjust the double feed
sensitivity.
4. Check the result.
5. Click "OK" finish the adjustment.
6. Click "OK" to return to the adjust menu.
5. Click "OK" finish the adjustment.
6. Click "OK" to return to the adjust menu.
—
* USB ID
1. Click "USB ID" on the adjust menu.
2. Click "Set" to store a new ID number for a new replaced
2. Click "Set" to store a new ID number for a new replaced
CONTROL Board.
3. Click "Close" to return to the adjust menu.
—
*This setting is available
only for a new replaced
CONTROL Board.
only for a new replaced
CONTROL Board.
Sensor sensitive
level
level
1. Click "Sensor sensitive level" on the adjust menu.
Note
Note
If dusts remain on the Starting Sensor, the adjustment is not
done properly and the paper detection may not work.
2. Click "Adjust".
3. Check each Sensor sensitive level (LED Current).
4. Click "Close" to return to the adjust menu.
3. Check each Sensor sensitive level (LED Current).
4. Click "Close" to return to the adjust menu.
—
LED Current
normal value : 50-250
normal value : 50-250
Item
Operation
Default
Remarks
Click on the first or last page to see other KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y service manuals if exist.