Read Panasonic KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y Service Manual online
48
Maintenance
Setting
Setting
1. Click "Maintenance Setting" on the main menu.
2. Click "Change" on "Maintenance Setting" dialog box to
2. Click "Change" on "Maintenance Setting" dialog box to
change the parameter value on the "Caution Setting"
dialog box.
dialog box.
3. Click "Roller Cleaning Notification" or "Roller
Replacement Notification" check box to inform the caution
information.
information.
4. Click "Clear Counter" for each counter on "Maintenance
Setting" dialog box and according to the message on the
display, click "OK" to clear each counter.
display, click "OK" to clear each counter.
5. Click "Scanning Glass Cleaning Notification" check box to
inform the scanning glass cleaning timing.
6. Click "OK" to renew the setting.
Clean Roller
Timing: 8,000
Timing: 8,000
Roller
Cleaning
Notification:
OFF
Cleaning
Notification:
OFF
Replace
Roller
Timing:
250,000
Roller
Timing:
250,000
Roller
Replacement
Notification:
ON
Replacement
Notification:
ON
Scanning
Glass
Cleaning
Notification:
OFF
Glass
Cleaning
Notification:
OFF
Setting range of roller
replacement and cleaning:
1,000 to 1,000,000
replacement and cleaning:
1,000 to 1,000,000
Cleaning Mode
1. Click "Cleaning Mode" on the main menu.
2. Click "Enter" on the "Cleaning Mode" dialog box.
3. Open the scanner's door, and press the Start / Stop button to
2. Click "Enter" on the "Cleaning Mode" dialog box.
3. Open the scanner's door, and press the Start / Stop button to
clean the exit rollers and the conveyor rollers.
The rollers rotate 90 degrees every time the Start/Stop button
is pressed.
The rollers rotate 90 degrees every time the Start/Stop button
is pressed.
4. Close the scanner's door.
5. Click "Exit" on the "Cleaning Mode" dialog box.
6. Click "Close" to return to the main menu.
5. Click "Exit" on the "Cleaning Mode" dialog box.
6. Click "Close" to return to the main menu.
—
Set Default
1. Click "Set Default" on the main menu.
2. Click "Set Default" on the "Set Default" dialog box to set
2. Click "Set Default" on the "Set Default" dialog box to set
the default values for "Sleep Mode", "Buzzer Setting" and
"Maintenance Setting".
"Maintenance Setting".
3. Click "Close" to return to the main menu.
—
Item
Operation
Default
Remarks
Click on the first or last page to see other KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y service manuals if exist.