Read Panasonic JS-950 / JS-950WS Service Manual online
1.2. Specifications
[ Common Specifications ]
Environmental condition
Item
Specification
Operating Temperature
+5°C – +40°C
Operating Humidity
15% RH – 85% RH (no dew)
Strage Temperature
-30°C – +60°C
Strage Humidity
10%RH – 90%RH
[ POS Workstation: JS-950WS-
ҘҘҘ ]
Item
Specification
Type
Intel® Celeron D
Package
LGA775
CPU
Frequency
Celeron D 352 : 3.2GHz
Core logic
Intel® 945G + ICH 7
Capacity
Standard: 512MB (use 1 DIMM slot)
Maximum: 2GB
Maximum: 2GB
Slot
2 DIMM slots, 240pin
Main
memory
memory
Type
DDR2-400/533/667 supported
Type of device
Flash Memory
BIOS supplier
AMI
BIOS
BIOS Function
ACPI 1.0b, APM 1.2, PXE boot, USB-FDD boot,
USB-CD ROM/DVD ROM boot, USB Flash Memory boot
USB-CD ROM/DVD ROM boot, USB Flash Memory boot
Supported OS
Windows 2000, Windows XP (including XP Embedded)
Windows Vista, MS-DOS 6.22 English
- Note: Device drivers are provided.
Windows Vista, MS-DOS 6.22 English
- Note: Device drivers are provided.
Windows 98SE does not support.
Other Disk Drive (Option)
External USB FDD interface
External USB DVD/CD-ROM interface
External USB DVD/CD-ROM interface
Local Area Network
Ethernet (10BASE-T/100BASE-TX)
- Note: Wake On LAN supported.
- Note: Wake On LAN supported.
Expansion Slot
1 Mini PCI BUS slot Type IIIA
(124pin Card Edge, 5.5 x 78 x 45mm)
(124pin Card Edge, 5.5 x 78 x 45mm)
- Note: The onboard VGA will stop working if the PCI
Express Graphic card is installed
Serial
4 ports 9pin D-SUB male are located at I/O panel.
- Note: 2 ports are Powered.
- Note: 2 ports are Powered.
Parallel
1 port 25pin D-SUB female is located at I/O panel.
- Note: IEEE 1824 SPP/EPP/ECP modes supported
- Note: IEEE 1824 SPP/EPP/ECP modes supported
Video
1 port 15pin D-SUB female is located at I/O panel.
- Note: The Dual Display function is Supported.
- Note: The Dual Display function is Supported.
(Exclude MS-DOS)
LAN
1 port RJ-45 is located at I/O panel.
USB 2.0
2 standard USB ports are located at I/O panel.
2 Powered-USB ports (12Vx1, 24Vx1) are located at I/O panel.
1 USB port is located at front.
2 Powered-USB ports (12Vx1, 24Vx1) are located at I/O panel.
1 USB port is located at front.
Audio
1 port of Line-out is located at I/O panel.
1 port of MIC-in is located at I/O panel.
1 port of MIC-in is located at I/O panel.
I/O ports
Cash Drawer
1 port 6pin DIN connector is located at I/O panel.
1 port 6pin modular is located at I/O panel
1 port 6pin modular is located at I/O panel
Switch
1 Power Switch (power on / off)
- Note: Power on/off by pushing a short period.
- Note: Power on/off by pushing a short period.
LED
1 Power status is located at front panel. (2 colors: green, red)
Green ON: operating state
Red ON: power off state
Red ON: power off state
1 HDD status is located at front panel. (green)
Light on access
1 LAN status is located at front panel. (green)
Light on Send/Receive
– 1-2 –
Click on the first or last page to see other JS-950 / JS-950WS service manuals if exist.