Read Panasonic VDR-D310EG / VDR-D310E / VDR-D310EB / VDR-D310EP / VDR-D310EF Service Manual online
2007
VDR-D310EG
VDR-D310E
VDR-D310EB
VDR-D310EP
VDR-D310EF
VDR-D310E
VDR-D310EB
VDR-D310EP
VDR-D310EF
VOL.1
Colour
(S)....................Silver Type
(S)....................Silver Type
DVD Video Camcorder
ORDER NO.VM0702008CE
1 Safety Precaution
3
1.1.
General Guidelines
3
2 Warning
4
2.1.
Prevention of Electro Static Discharge (ESD) to
Electrostatically Sensitive (ES) Devices
4
2.2.
Service caution based on legal restrictions
5
2.3.
Caution for AC Cord (RJA0053-3X type)
6
2.4.
How to Replace the Lithium Battery (PROCEDURE)
7
3 Service Navigation
8
3.1.
Service Information
8
3.2.
Service Caution
9
3.3.
Procedure for Removing Disc
10
4 Specifications
11
5 Location of Controls and Components
12
6 Service Mode
15
6.1.
Error Display
15
6.2.
Service Menu
16
7 Service Fixture & Tools
18
7.1.
Service Tools and Equipment
18
8 Disassembly and Assembly Instructions
19
8.1.
Disassembly Frow Chart
19
8.2.
P.C.B. Layout
20
8.3.
Disassembly Procedures
21
8.4.
Disassembly Procedures of Camera Lens Unit
28
9 Measurements and Adjustments
29
9.1.
Service Positions
29
9.2.
Location for Connectors of the Main P.C.B.
31
9.3.
Electrical Adjustment Procedures
32
10 Maintenance
35
10.1. Cleaning Lens, Viewfinder and LCD Panel
35
10.2. Cleaning Disc
35
10.3. Cleaning optical pickup
35
11 Schematic Diagrams
37
11.1. OVERALL SCHEMATIC DIAGRAM
37
11.2. INTERCONNECTION SCHEMATIC DIAGRAM
38
11.3. FRONT SCHEMATIC DIAGRAM
40
11.4. MONITOR SCHEMATIC DIAGRAM
41
11.5. EVF SCHEMATIC DIAGRAM
42
11.6. EVF FPC SCHEMATIC DIAGRAM
42
11.7. DISC COVER LOCK UNIT SCHEMATIC DIAGRAM
42
11.8. SIDE L UNIT SCHEMATIC DIAGRAM
42
11.9. REAR CASE UNIT SCHEMATIC DIAGRAM
43
11.10. SIDE R SCHEMATIC DIAGRAM
43
11.11. SHAFT FPC SCHEMATIC DIAGRAM
43
11.12. JACK SCHEMATIC DIAGRAM
44
11.13. 3CCD FPC SCHEMATIC DIAGRAM
45
12 Printed Circuit Board
47
12.1. SIDE R P.C.B.
47
12.2. EVF P.C.B.
47
12.3. FRONT P.C.B.
48
12.4. JACK P.C.B.
49
12.5. MONITOR P.C.B.
50
13 Parts and Exploded Views
51
13.1. EXPLODED VIEWS
51
13.2. REPLACEMENT PARTS LIST
57
CONTENTS
Page
Page
2
VDR-D310EG / VDR-D310E / VDR-D310EB / VDR-D310EP / VDR-D310EF
1 Safety Precaution
1.1. General Guidelines
1. IMPORTANT SAFETY NOTICE
There are special components used in this equipment which are important for safety. These parts are marked by in the
Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List. It is essential that these critical parts
should be replaced with manufacturer’s specified parts to prevent X-RADIATION, shock fire, or other hazards. Do not modify
the original design without permission of manufacturer.
Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List. It is essential that these critical parts
should be replaced with manufacturer’s specified parts to prevent X-RADIATION, shock fire, or other hazards. Do not modify
the original design without permission of manufacturer.
2. An Isolation Transformer should always be used during the servicing of AC Adaptor whose chassis is not isolated from the AC
power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury
from electrical shocks. It will also protect AC Adaptor from being damaged by accidental shorting that may occur during
servicing.
from electrical shocks. It will also protect AC Adaptor from being damaged by accidental shorting that may occur during
servicing.
3. When servicing, observe the original lead dress. It a short circuit is found, replace all parts which have been overheated or
damaged by the short circuit.
4. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly
installed.
5. After servicing, make the following leakage current checks to prevent the customer from being exposed to shock hazards.
3
VDR-D310EG / VDR-D310E / VDR-D310EB / VDR-D310EP / VDR-D310EF
2 Warning
2.1. Prevention of Electro Static Discharge (ESD) to Electrostatically
Sensitive (ES) Devices
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called
Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and
semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component damage
caused by electro static discharge (ESD).
Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and
semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component damage
caused by electro static discharge (ESD).
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your
body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap,
which should be removed for potential shock reasons prior to applying power to the unit under test.
which should be removed for potential shock reasons prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as
aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4. Use only an antistatic solder removal device. Some solder removal devices not classified as “antistatic (ESD protected)” can
4. Use only an antistatic solder removal device. Some solder removal devices not classified as “antistatic (ESD protected)” can
generate electrical charge sufficient to damage ES devices.
5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most
replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable
conductive material).
conductive material).
7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material
to the chassis or circuit assembly into which the device will be installed.
CAUTION:
CAUTION:
Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the
brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD)
sufficient to damage an ES device).
sufficient to damage an ES device).
4
VDR-D310EG / VDR-D310E / VDR-D310EB / VDR-D310EP / VDR-D310EF