Read Panasonic SDR-S70P / SDR-S70PC / SDR-S70EG / SDR-S70EF / SDR-S70EC / SDR-S70EP / SDR-S70EB / SDR-S70EE / SDR-S71P / SDR-S71GC / SDR-S71GA / SDR-S71GN / SDR-S71GK / SDR-S71PU / SDR-S71PR / SDR-T70EE Service Manual online
SDR-S70PC
SDR-S70EG
SDR-S70EF
SDR-S70EC
SDR-S70EP
SDR-S70EB
SDR-S70EE
SDR-S71P
SDR-S71GC
SDR-S71GA
SDR-S71GN
SDR-S71GK
SDR-S71PU
SDR-S71PR
SDR-T70PC
SDR-T70EG
SDR-T70EF
SDR-T70EC
SDR-T70EP
SDR-T70EB
SDR-T70EE
SDR-T71PU
SDR-T76GC
(K)........Black Type
(N)........Gold Type (SDR-S71GC)
(S)........Silver Type (SDR-S70P/PC, S71P/GC/GA/GN/GK, T76GC)
(R)........Red Type (SDR-S70P/PC/EG/EF/EC/EP/EB/EE, S71P/GC/GA/GN, T71PU, T76GC)
(P)........Pink Type (SDR-S71GC/GA)
(H)........Gray Type (SDR-S70EB)
2.3. Caution for AC Cord (For EB/GC/GA) ----------------6
2.4. How to Replace the Lithium Battery
3.2. How to Define the Model Suffix (NTSC or PAL
5 Location of Controls and Components------------------ 12
6 Service Mode ----------------------------------------------------- 15
6.2. Lock Search History Indication ----------------------- 16
6.3. Power ON Self Check Result Display--------------- 17
6.4. Lock Search History Clear ----------------------------- 17
8.2. P.C.B. Layout---------------------------------------------- 19
8.3. Disassembly Procedures------------------------------- 20
8.4. Disassembly Procedures of Camera Lens
9.3. Location for Connectors of the Main P.C.B. ------- 31
9.4. Electrical Adjustment ------------------------------------ 32
should be replaced with manufacturer's specified parts to prevent X-RADIATION, shock fire, or other hazards. Do not modify
the original design without permission of manufacturer.
injury from electrical shocks. It will also protect AC Adaptor from being damaged by accidental shorting that may occur during
servicing.
2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on
chassis, the reading should be between 1M
lent) may be used to make the hot checks, leakage cur-
rent must not exceed 1/2 mA. In case a measurement is
outside of the limits specified, there is a possibility of a
shock hazard, and the equipment should be repaired and
rechecked before it is returned to the customer.
(ES) Devices
trostatic Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semi-
conductor "chip" components. The following techniques should be used to help reduce the incidence of component damage caused
by electrostatic discharge (ESD).
which should be removed for potential shock reasons prior to applying power to the unit under test.
4. Use only an antistatic solder removal device. Some solder removal devices not classified as "antistatic (ESD protected)" can
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most
ble conductive material).
CAUTION:
ficient to damage an ES device).