Read Panasonic SDR-S100PP / SDR-S100E / SDR-S100EB / SDR-S100EG / SDR-S100GC / SDR-S100GK Service Manual online
7
2.4.
How to Replace the Lithium Battery
2.4.1.
Replacement Procedure
1. Remove the FRONT PCB. (Refer to Disassembly Procedures.)
2. Remove the Lithium battery (Ref. No. “B6801” at foil side of FRONT PCB) and then replace it into new one.
2. Remove the Lithium battery (Ref. No. “B6801” at foil side of FRONT PCB) and then replace it into new one.
NOTE:
This Lithium battery is a critical component.
(Type No.: ML-612S/F9D Manufactured by Matsushita Battery Industrial Co.,Ltd.)
It must never be subjected to excessive heat or discharge.
It must therefore only be fitted in requirement designed specifically for its use.
Replacement batteries must be of same type and manufacture.
They must be fitted in the same manner and location as the original battery, with the correct polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other purpose.
It should be disposed of in waste products destined for burial rather than incineration.
(Type No.: ML-612S/F9D Manufactured by Matsushita Battery Industrial Co.,Ltd.)
It must never be subjected to excessive heat or discharge.
It must therefore only be fitted in requirement designed specifically for its use.
Replacement batteries must be of same type and manufacture.
They must be fitted in the same manner and location as the original battery, with the correct polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other purpose.
It should be disposed of in waste products destined for burial rather than incineration.
Click on the first or last page to see other SDR-S100PP / SDR-S100E / SDR-S100EB / SDR-S100EG / SDR-S100GC / SDR-S100GK service manuals if exist.