Read Panasonic NV-GS70EG / NV-GS70EGM / NV-GS70B / NV-GS70EN / NV-GS70A / NV-GS70ENT (serv.man2) Service Manual online
1 INTRODUCTION
1.1. ABOUT LEAD FREE SOLDER (PbF)
Distinction of PbF PCB: PCBs (manufactured) using lead free solder will have a PdF stamp on the PCB.
Caution:
·
Pb free solder has a higher melting point than standard solder, Typically the melting point is 50-70°F (30-40°C) higher.
Please use a high temperature soldering iron. In case of soldering iron with temperature control, please set it to 700±20°F
(370±10°C).
(370±10°C).
·
Pb free solder will tend to splash when heated too high (about 1100°F/ 600°C).
When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat the
soldering points with the Pb free solder until it melts enough.
soldering points with the Pb free solder until it melts enough.
3
NV-GS70EG / NV-GS70EGM / NV-GS70B / NV-GS70EN / NV-GS70A / NV-GS70ENT
Click on the first or last page to see other NV-GS70EG / NV-GS70EGM / NV-GS70B / NV-GS70EN / NV-GS70A / NV-GS70ENT (serv.man2) service manuals if exist.