Read Panasonic NV-GS24EG / NV-GS26GK / NV-GS27E / NV-GS27EB / NV-GS27EE / NV-GS27EF / NV-GS27EG / NV-GS27EP / NV-GS27GC / NV-GS27GN / NV-GS37E / NV-GS37EB / NV-GS37EG / NV-GS37EK / NV-GS37EP / NV-GS47EE / NV-GS47GC / NV-GS57EE / NV-GS57GC / NV-GS58GK Service Manual online
NV-GS27E NV-GS27EB
NV-GS27EE NV-GS27EF
NV-GS27EG NV-GS27EP
NV-GS27GC NV-GS27GN
NV-GS37E NV-GS37EB
NV-GS37EG NV-GS37EK
NV-GS37EP NV-GS47EE
NV-GS47GC NV-GS57EE
NV-GS57GC NV-GS58GK
(S)...................Silver Type
/ NV-GS47GC NV-GS57EE / NV-GS57GC NV-GS58GK
which are important for safety. These parts are marked by
that these
other hazards. Do not modify the original design without
permission of manufacturer.
the AC power line. Use a transformer of adequate power
rating as this protects the technician from accidents
resulting in personal injury from electrical shocks. It will also
protect AC Adaptor from being damaged by accidental
shorting that may occur during servicing.
overheated or damaged by the short circuit.
installed.
hazards.
Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and
semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage
caused by electro static discharge (ESD).
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your
which should be removed for potential shock reasons prior to applying power to the unit under test.
4. Use only an antistatic solder removal device. Some solder removal devices not classified as "antistatic (ESD protected)" can
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most
conductive material).
CAUTION :
sufficient to damage an ES device).
/ NV-GS47GC NV-GS57EE / NV-GS57GC NV-GS58GK