Read Panasonic HDC-SX5P / HDC-SX5PC / HDC-SX5EG / HDC-SX5E / HDC-SX5EB / HDC-SX5EP / HDC-SX5EE / HDC-SX5GC / HDC-SX5GCS / HDC-SX5GN / HDC-SX5SG / HDC-SX5PL / HDC-SX5GK Service Manual online
(S)....................Silver Type
2.3. Service caution based on legal restrictions----------6
2.4. How to Replace the Lithium Battery -------------------7
2.5. How to Recycle the Lithium Battery (U.S.
3.2. Service Caution------------------------------------------- 10
3.3. Procedure for Removing Disc------------------------- 11
5 Location of Controls and Components------------------ 13
6 Service Mode ----------------------------------------------------- 15
6.2. Service Menu---------------------------------------------- 16
8 Disassembly and Assembly Instructions--------------- 19
8.2. P.C.B. Layout---------------------------------------------- 20
8.3. Disassembly Procedures------------------------------- 21
8.4. Disassembly Procedures of Camera Lens
9.2. Location for Connectors of the Module P.C.B.
10.2. Cleaning Disc --------------------------------------------- 40
10.3. Cleaning optical pickup --------------------------------- 40
should be replaced with manufacturer’s specified parts to prevent X-RADIATION, shock fire, or other hazards. Do not modify
the original design without permission of manufacturer.
injury from electrical shocks. It will also protect AC Adaptor from being damaged by accidental shorting that may occur during
servicing.
2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on
chassis, the reading should be between 1M
lent) may be used to make the hot checks, leakage cur-
rent must not exceed 1/2 mA. In case a measurement is
outside of the limits specified, there is a possibility of a
shock hazard, and the equipment should be repaired and
rechecked before it is returned to the customer.
(ES) Devices
trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and
which should be removed for potential shock reasons prior to applying power to the unit under test.
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most
ble conductive material).
CAUTION:
ficient to damage an ES device).