Read Panasonic HDC-SD600P / HDC-SD600EB / HDC-SD600EC / HDC-SD600EEK / HDC-SD600EF / HDC-SD600EG / HDC-SD600EP / HDC-SD600GN Service Manual online
17
6 Service Mode
1. Indication method of the service menu
Set the mode switch “Motion Picture Recording” mode.
2. Turn the power on, and then while keep pressing the “Zoom lever” to W side, “Intelligent auto/Manual” button and “Menu” but-
ton for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
Service mode menu
NOTE:
Do not using service mode except above table of Service mode menu.
Do not using service mode except above table of Service mode menu.
3. End method of the top screen of the service mode menu
Push the “Menu” button to end the service mode, and then POWER OFF.
Screen display
Contents
Function
1
Factory settings
Function to throw a product up in a factory shipment state
(When recorded data in Built-in memory, “error display” is done)
(When recorded data in Built-in memory, “error display” is done)
4
Lock search history indication
Display the camera system error code for three histories saved
in EEPROM
in EEPROM
5
Power ON self check result display
Power ON self check (function to diagnose correct function of
the device and interface between devices) result display
the device and interface between devices) result display
Click on the first or last page to see other HDC-SD600P / HDC-SD600EB / HDC-SD600EC / HDC-SD600EEK / HDC-SD600EF / HDC-SD600EG / HDC-SD600EP / HDC-SD600GN service manuals if exist.