HDC-SD200EB, HDC-SD200EC, HDC-SD200EF, HDC-SD200EG, HDC-SD200EP, HDC-TM200EE, HDC-TM200GC, HDC-TM200GD, HDC-TM200GJ, HDC-TM200GK, HDC-TM200GN, HDC-TM200GT, HDC-TM200SG, HDC-TM200EEK - Panasonic Movie Service Manual (repair manual). Page 4

Read Panasonic HDC-SD200EB / HDC-SD200EC / HDC-SD200EF / HDC-SD200EG / HDC-SD200EP / HDC-TM200EE / HDC-TM200GC / HDC-TM200GD / HDC-TM200GJ / HDC-TM200GK / HDC-TM200GN / HDC-TM200GT / HDC-TM200SG / HDC-TM200EEK Service Manual online

4
1.4.
How to Discharge the Capacitor on Sub PCB
CAUTION:
1.
Be sure to discharge the capacitor on SUB PCB.
2.
Be careful of the high voltage circuit on SUB PCB when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and Remove the necessary parts/unit.
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
Ω /5W).
(an equivalent type of resistor may be used.)
3. Put the resistor between both terminals of capacitor on SUB PCB for approx. 5 seconds.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
Page of 86
Display

Click on the first or last page to see other HDC-SD200EB / HDC-SD200EC / HDC-SD200EF / HDC-SD200EG / HDC-SD200EP / HDC-TM200EE / HDC-TM200GC / HDC-TM200GD / HDC-TM200GJ / HDC-TM200GK / HDC-TM200GN / HDC-TM200GT / HDC-TM200SG / HDC-TM200EEK service manuals if exist.