Read Panasonic HDC-HS250P / HDC-HS250PC / HDC-HS250PU / HDC-HS200EB / HDC-HS200EC / HDC-HS200EE / HDC-HS200EG / HDC-HS200EP / HDC-HS200GC / HDC-HS200GJ / HDC-HS200GK / HDC-HS200GN / HDC-HS200GT / HDC-HS200SG / HDC-HS200EEK (serv.man3) Service Manual online
4
1.4.
How to Discharge the Capacitor on Sub PCB
CAUTION:
1. Be sure to discharge the capacitor on SUB PCB.
2. Be careful of the high voltage circuit on SUB PCB when servicing.
2. Be careful of the high voltage circuit on SUB PCB when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and Remove the necessary parts/unit.
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
Ω /5W).
(an equivalent type of resistor may be used.)
3. Put the resistor between both terminals of capacitor on SUB PCB for approx. 5 seconds.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
Click on the first or last page to see other HDC-HS250P / HDC-HS250PC / HDC-HS250PU / HDC-HS200EB / HDC-HS200EC / HDC-HS200EE / HDC-HS200EG / HDC-HS200EP / HDC-HS200GC / HDC-HS200GJ / HDC-HS200GK / HDC-HS200GN / HDC-HS200GT / HDC-HS200SG / HDC-HS200EEK (serv.man3) service manuals if exist.