Read Panasonic SR-DY181WTQ / SR-DY101WTQ Service Manual online
8
• Do not insert parts from the reverse side of the board.
•
When testing with a multimeter during continuous tests, do not use high resistance ranges (×10,000), which may subject ICs and
other components on the board to excess voltage and thus cause damage.
•
Keep soldering time as short as possible (within a few seconds).
•
Unplug the power cord before replacing any components.
•
Be aware of the risk of electric shock or injury when handling a live control board. The control board's transformer carries 220 V
AC.
4.2. SELF-DIAGNOSIS
FUNCTION
Symbol
Symptom
Remedy
Pan sensor or the branch components
of pan sensor on the control board are
deactivated.
of pan sensor on the control board are
deactivated.
Replace the pan sensor or replace the
branch component of pan sensor on the
control board.
branch component of pan sensor on the
control board.
Lid sensor or the branch components
of lid sensor on the control board are
deactivated.
of lid sensor on the control board are
deactivated.
Replace the lid sensor or replace the
branch component of lid sensor on the
control board.
branch component of lid sensor on the
control board.
Relay or circuit board is deactivated.
Replace the relay or control board.
When Keep Warm exceeding 96 hours.
Press “Power Off” button to resume
keeping warm.
keeping warm.
IP4853_SR_DY181_DY101_Eng_05_131230.indd 8
IP4853_SR_DY181_DY101_Eng_05_131230.indd 8
2013-12-30 11:54:54
2013-12-30 11:54:54
Click on the first or last page to see other SR-DY181WTQ / SR-DY101WTQ service manuals if exist.