Read Panasonic SD-253 Service Manual online
1. Remove the screw and the spring washer that secures the
ground wire A assembly.
2. Raise the two claws of the ground plate up with the flat-
blade screwdriver.
3. Remove the ground plate from the heater terminal.
Caution:
Before attaching the ground plate to the heater, restore
the connector to its original shape so that it will firmly
attach to the heater.
the connector to its original shape so that it will firmly
attach to the heater.
1. Remove the screw that secures the sensor fixing plate.
2. Remove the sensor assembly including the thermal fuse
unit.
3. Remove the connector.
Fig.16
No.
Parts Name
1
Screw
2
Spring washer
3
Ground wire A Ass’y
4
Ground plate
5
Flat-blade screwdriver
6
Heater
Fig.17
No.
Parts Name
1
(+) screw (short) driver
2
Screw
3
Angle Unit
4
Heater case Ass’y
5
Sensor fixing plate
6
Thermal fuse Unit
7
Sensor Ass’y
3.10. Ground wire A assembly
3.11. Sensor assembly
16
SD-253
Click on the first or last page to see other SD-253 service manuals if exist.