Read Panasonic NN-ST271SZPE Service Manual online
5-14
CONDITION
CHECK
RESULT
CAUSE
REMEDY
1. Fuse blows.
Continuity.
No continuity.
Continuity.
Shorted contact at
the primary switch.
the primary switch.
Replace primary
and monitor
switches.
and monitor
switches.
No continuity.
Normal.
Defective high
voltage capacitor.
voltage capacitor.
Replace high
voltage capacitor.
voltage capacitor.
Fuse blows again
Defective high volt-
age transformer.
age transformer.
Replace high volt-
age transformer.
age transformer.
Malfunction of the
monitor switch.
monitor switch.
Replace primary
and monitor
switches.
and monitor
switches.
Check continuity
of monitor
switch (with
door closed).
of monitor
switch (with
door closed).
Check continuity
of primary
switch (with
door opened).
of primary
switch (with
door opened).
Disconnect one
side of the wire
lead connected
from transformer
to the high
voltage
capacitor and
operate the unit.
side of the wire
lead connected
from transformer
to the high
voltage
capacitor and
operate the unit.
Replace fuse
(TROUBLE 2) Oven does not operate at all ; Display window does not display any figures and
no input is accepted.
NOTE : All these switches must be replaced at the same time. Refer to page 5-6, 5-7
2. Fuse does not
blow.
No continuity.
No continuity.
Replace power
supply cord.
supply cord.
Defective mag-
netron thermostat.
netron thermostat.
Defective power
supply cord.
supply cord.
Replace mag-
netron thermostat.
netron thermostat.
Check continuity
of magnetron
thermostat.
of magnetron
thermostat.
Check continuity
of power supply
cord.
of power supply
cord.
Continuity.
Click on the first or last page to see other NN-ST271SZPE service manuals if exist.