Read Panasonic NN-ST254MZPE Service Manual online
5-10
COMPONENTS
TEST PROCEDURE
RESULTS
1
3
5
Relay 2
Relay 1
FUSE
THERMAL
CUT-OUT
CUT-OUT
RELAY 2 OF P.C.B.
(Wire leads removed.)
Note: Relay
Relay 1: Fan motor
(Wire leads removed.)
Note: Relay
Relay 1: Fan motor
Turntable motor
Oven lamp
Oven lamp
Relay 2: Microwave
Check for continuity of the fuse with an
multi-meter.
multi-meter.
NOTE: If the fuse is blown, check the primary, the secondary, and the monitor switches,
H.V.D. and H.V.C. before replacing the fuse.
If the fuse is blown by improper switch operation replace the defective switch and the
fuse at the same time. Replace just the fuse if the switches operate normally.
H.V.D. and H.V.C. before replacing the fuse.
If the fuse is blown by improper switch operation replace the defective switch and the
fuse at the same time. Replace just the fuse if the switches operate normally.
Check for P.C.B. connector.
Normal Abnormal
Cooking Start OFF
Below specified
temperature
specified
temperature
Above
L.V.Transformer of P.C.B
Disconnect the 3 pin
connector from P.C.B.
connector from P.C.B.
*
Normal
Abnormal
(Refer to schemetic diagram)
Click on the first or last page to see other NN-ST254MZPE service manuals if exist.