Read Panasonic NN-DF383BZPE Service Manual online
7.4. Trouble related to Digital Programmer Circuit
SYMPTOM
STEP
CHECK
RESULT
CAUSE/CORRECTIONS
No display when oven is first plugged
in
in
1
Fuse pattern of D.P.C.
Normal
→Step2
Open
Replace D.P.C. or Fuse
Pattern
Pattern
2
IC10 pin4 voltage
Abnormal 0V
IC26
Normal=12V
→Step3
3
IC10 pin5 voltage
Abnormal
IC10
Normal=5V
IC1, CX320, Display
No key input
1
Touch switch continuity
Abnormal
Touch switch
Normal
IC1
No beep sound
1
IC1 pin 5 voltage
Abnormal
IC1
Normal=5V
BZ210, Q210
Power relay A(RY2) does not turn on
even though the program had been set
and the start pad is tapped
even though the program had been set
and the start pad is tapped
1
IC1 pin 78 voltage while operation
Abnormal
IC1
Normal=5V
RY2, Q222
No microwave oscillation at any power
1
IC1 pin 77 voltages while operation at high
power
power
Abnormal
IC1
Normal=5V
→Step2
2
Collector of Q223
Abnormal
Q223 and/or Q225, Q226,
Q227
Q227
Normal 0.7V
RY1
Dark or unclear display
1
Replace display and check operation
Normal
Display
Abnormal
IC1
Missing or lighting of unnecessary
segment
segment
1
Replace IC1 and check operation
Normal
IC1
Abnormal
Display
H95/H97/H98 appears in window and
oven stops operation.Program High
power for 1 minute and conduct
following test quickly, unless
H95/H97/H98 appears and oven stops
oven stops operation.Program High
power for 1 minute and conduct
following test quickly, unless
H95/H97/H98 appears and oven stops
1
Unplug CN702 (2 pin) connector and
measure voltage between terminals
measure voltage between terminals
Abnormal=0V
1. Latch Switch
2. D.P.C. /Power Relay
2. D.P.C. /Power Relay
Normal=220V
→Step2
2
Unplug CN701 (3 pin) connector and
measure pin1 voltage of D.P.C. CN3
measure pin1 voltage of D.P.C. CN3
Abnormal=0V
D.P.C.
Approx. AC 3V
Magnetron
29
NN-DF383B
Click on the first or last page to see other NN-DF383BZPE service manuals if exist.