Read Panasonic NN-CD565BZPE (serv.man2) Service Manual online
4.2. Digital programmer circuit
(D.P.C)
NOTE:
Be sure to ground any static electric charge built up on
your body before handling the D.P.C.
your body before handling the D.P.C.
1. Disconnect all connectors from D.P.C board DU.
2. Remove 1 screw holding escutcheon base and slide the
escutcheon base upward slightly..
3. Pull out dial straightly.
4. Remove 4 screws holding D.P.C board DU.
4. Remove 4 screws holding D.P.C board DU.
5. Disconnect flat cable CN17 from D.P.C. board DU.
6. Remove 6 screws holding D.P.C board AU.
6. Remove 6 screws holding D.P.C board AU.
10
NN-CD565B
Click on the first or last page to see other NN-CD565BZPE (serv.man2) service manuals if exist.