Read Panasonic NE-1027ZPE / NE-1037ZPE Service Manual online
2.1. Manual Heating for Single
Stage
OPERATION
DISPLAY
1. Plug the power supply cord into
wall receptacle.
2. Open the door.
Place a water load in the oven
and close the door.
and close the door.
3. Press Power Level
pad
once.
(Sets to HIGH power)
(Sets to HIGH power)
4. Press 2 , 0 , 0 pads.
(Sets to 2 minutes)
5. Press Start
pad.
(Sets to 2 minutes)
6. When
cooking
time
has
elapsed, oven beeps 5 times
and shuts off. Display blinks
zero.
and shuts off. Display blinks
zero.
7. Open the door and take out the
water
load.
Display
stops
blinking.
8. Close the door.
1 minute later, display will return
blank.
blank.
2.2. Manual Heating for 2nd Stage
OPERATION
DISPLAY
1. Follow step 1 to 4 for 1st stage.
2. Press Power Level
pad 2
times.
(Sets MED power)
(Sets MED power)
OPERATION
DISPLAY
3. Press 1 , 0 , 0 pads.
(Sets to 1 minute)
4. Press Start
pad. Total time
for
both
stages
will
be
displayed.
5. When the 1st stage cooking
time has elapsed, oven beeps
once
once
and
automatically
switches to 2nd stage cooking.
(2nd stage)
(2nd stage)
6. When
cooking
time
has
elapsed, oven beeps 5 times
and shuts off. Display blinks
zero.
and shuts off. Display blinks
zero.
7. Open the door and take out the
water
load.
Display
stops
blinking.
8. Close the door.
1 minute later, display will turn
blank.
blank.
2.3. Memory Setting for Single
Stage Operation Oven is not in
program lock mode.
program lock mode.
OPERATION
DISPLAY
1. Press Prog
pad.
NOTE: Display must be blank to
start programming.
start programming.
2. Press 5 pad.
(Sets to memory pad 5)
3. If memory was previously
programmed, the pad number
and the previously selected
time and power level will
appear in the display.
and the previously selected
time and power level will
appear in the display.
2 OPERATION PROCEDURE (NE-1037)
6
NE-1027 / NE-1037
Click on the first or last page to see other NE-1027ZPE / NE-1037ZPE service manuals if exist.