Read Panasonic MJ-L500STQ Service Manual online
14
2. Unscrew the fixing screws (2 pieces), and remove the
panel cover.
*Insert the slotted screwdriver into the gap between the
panel and the panel cover, and separate them.
*Insert the slotted screwdriver into the gap between the
panel and the panel cover, and separate them.
3. Unscrew the fixing screws (4 pieces).
4. Remove the PCB case unit.
5. After the PCB case unit is removed from the panel, take
out the switch cover unit, the breaker link, and the spring.
Take care not to lose any of the parts.
* To assemble, first insert the safety lock pin of the switch
cover into the hole of the breaker link (with a spring), install
the PCB case unit, and then assemble them into the panel,
as shown in the figure.
Take care not to lose any of the parts.
* To assemble, first insert the safety lock pin of the switch
cover into the hole of the breaker link (with a spring), install
the PCB case unit, and then assemble them into the panel,
as shown in the figure.
6. Press and push the fixing claws (in 2 places), and remove
the PCB case cover
7. Remove the fast-on terminals of the switch.
Click on the first or last page to see other MJ-L500STQ service manuals if exist.