Read Panasonic MC-E9001 / MC-E9003 Service Manual online
3.5. POWER SUPPLY CORD
1. To replace the power supply cord, take out cord reel ass'y
and disassemble it as explained previously in paragraph 3.4
Cord reel unit, points 1-3.
Cord reel unit, points 1-3.
2. Unwind the power supply cord from the cord reel unit.
3. Press and release the stopper on the cord reel and lift the
rail base by pushing the lower end. (Fig.17)
4. Disconnect the power supply cord from the rail base and
replace with a new one.
Note: Observe the colour of the lead wires from the
power supply cord before reinstalling the new one.
(Fig.18)
power supply cord before reinstalling the new one.
(Fig.18)
5. Insert the rail base through the cord reel slot. (Fig.19)
Note: Put Vaseline on the rail base before assembling
the cord reel support.
the cord reel support.
6. Wind up the power supply cord in the arrow direction as
indicated on the spring plate.
7. Reassemble cord reel unit and cord reel support and
refasten the screw.
Note: Wind up the power supply cord 2 extra times to
maintain spring efficiency.
maintain spring efficiency.
8. Reinstall cord reel ass'y into place. Connect the lead wires
according to the schematic diagram and reassemble upper
body and remaining parts in the reverse order.
body and remaining parts in the reverse order.
Note: Make sure the lead wires are correctly positioned
to avoid pinching them between parts.
to avoid pinching them between parts.
3.6. BRAKE LEVER UNIT
1. Remove upper body as explained previously in paragraph
3.1 Motor, points 1-6.
2. Take out cord reel ass'y and remove the spring and brake
lever unit from cord reel support. (Fig.20)
3. Replace the brake lever unit with a new one and reinstall it.
4. Reassemble upper body and remaining parts in the reverse
order.
Note: Make sure the lead wires are correctly positioned
to avoid pinching them between parts.
to avoid pinching them between parts.
8
MC-E9001 / MC-E9003
Click on the first or last page to see other MC-E9001 / MC-E9003 service manuals if exist.