Read Panasonic MC-E8035 / MC-E8035K Service Manual online
3.4. CORD REEL UNIT
1. Remove upper body and take out cord reel ass`y as
explained previously in paragraph 3.1 Motor, points 1-4.
2. Press the blake lever and unwind the power supply cord five
times to release the cord reel spring efficiency. (Fig.10)
3. Detach cord reel unit and cord reel support by removing the
screw. (Fig.11)
4. Replace the cord reel unit with a new one and reassemble
with the cord reel support refastening the screw.
Note: Wind up the power supply cord 5 extra times, as
indicated on the spring plate, to maintain the spring
efficiency.
indicated on the spring plate, to maintain the spring
efficiency.
5. Connect the lead wires according to the schematic diagram.
6. Reinstall cord reel ass´y into place and reassemble the
remaining parts in the reverse order.
* If the cord is damaged, replace the cord reel unit with
new one.
new one.
Reason:
If the cord has worn out, the cord reel spring or the
cord´s electric-welded zone may also be adversely
affected.
cord´s electric-welded zone may also be adversely
affected.
3.5. BRAKE LEVER UNIT
1. Remove upper body and cord reel assembly as explained
previously in paragraph 3.1 Motor, points 1-5.
2. To change the brake lever unit, replace the body partition
assembly with new one. (Fig.12)
Reason:
The body partition and the brake lever cannot be
individually removed.
individually removed.
3.6. P.C.B. Ass’ y
1. Remove upper body as explained previously in paragraph
3.1 Motor, points 1-3.
2. Remove connections from contact spring and take out
motor unit.
3. Remove P.C.B holder.
4. Remove the hook of the Moter Sapport Cover case, and
detach P.C.B Ass´y. (Fig.13)
7
MC-E8035 / MC-E8035K
Click on the first or last page to see other MC-E8035 / MC-E8035K service manuals if exist.