Read Panasonic MC-E7101 Service Manual online
5.7. Replacing the P.C.B-A unit
1. Remove the upper body.(5.4.Reference)
2. Disconnect the two lead wires from the motor.
( 5.5.Reference)
3. Disconnect the two lead wires from the ON/OFF switch
fixed to the upper body.
4. Disconnect the two lead wires connected to the cord reel.
.(5.6.Reference)
5. Remove the bands fastening the fuse´s lead wires.
6. Remove the packing fastening the P.C.B.´s lead wires.
7. Remove the P.C.B.
5.8. Replacing the ON/OFF switch
1. Remove the three packings from around the switch.
2. Release the tab retaining the switch pedal, which you can
find by removing the packings, by applying strong pressure
and tapping with a screwdriver or a similar instrument.
and tapping with a screwdriver or a similar instrument.
3. Release the two other tabs in the same way. Note that
when releasing the second tab, it is recommended to insert
a thin flathead screwdriver to prevent the first tab from
getting back.
a thin flathead screwdriver to prevent the first tab from
getting back.
4. Remove the screws of the switch cover fastening the switch
and then remove the switch.
10
MC-E7101
Click on the first or last page to see other MC-E7101 service manuals if exist.