Read Panasonic MC-CG883JR79 Service Manual online
6
4 Disassembly and Assembly Instructions
Precautions: Make sure to power off the vacuum cleaner before replacing the parts.
Disconnect the plug from the outlet.
Note:
(1) Do not alter the model, parts, or materials during repair.
(2) If a wiring unit is supplied as a repair part, replace the whole unit with the new one instead of repairing or reconnecting
the broken portions only.
(3) Insert/remove the fast-on terminals by pushing/pulling them straight out without jiggling them or applying unneces-
sary force.
4.1.
Remove the Dust cover assy.
1. Open the Dust cover assy. Insert a slotted screwdriver
into the gap in the joint between the Upper body and the
Dust box lid unit. Remove the Dust cover by moving the
screwdriver in the direction of the arrow.
Dust box lid unit. Remove the Dust cover by moving the
screwdriver in the direction of the arrow.
4.2.
Remove the Rear cover unit,
Switch cover, and the Pedal
cover.
Switch cover, and the Pedal
cover.
1. Remove the cap seal of the rear cover unit.
2. Remove the screw holding the Rear cover unit.
2. Remove the screw holding the Rear cover unit.
While pressing the tab of the Rear cover unit with the
screwdriver, remove the Unit by lifting its rear side
(screwed side).
screwdriver, remove the Unit by lifting its rear side
(screwed side).
3. Remove the two screws each from the SWITCH COVER
and PEDAL COVER.
Click on the first or last page to see other MC-CG883JR79 service manuals if exist.