Read Panasonic MC-CG462-RR79 / MC-CG462RR79 Service Manual online
8
4.4.
Motor removal
1. Remove the dust box lid assembly. (Refer to paragraph
4.1 on P.6)
2. Remove the upper body from the lower body. (Refer to
paragraph 4.2 on P.6)
3. Remove the printed circuit board AU. (Refer to paragraph
4.3 on P.7)
4. Remove the two screws fixing the printed circuit board
holder and pull it out from the lower body.
5. Lift the motor set section from the lower body U.
6. Remove all components fitted to the motor.
a. Remove the motor support rubber (front).
b. Remove the motor support rubber (rear).
b. Remove the motor support rubber (rear).
c. Remove the motor support.
d. Remove the noise suppressor U.
e. Remove all lead wires.
e. Remove all lead wires.
Click on the first or last page to see other MC-CG462-RR79 / MC-CG462RR79 service manuals if exist.