Read Panasonic ES2023 / ES2024 / ES2027 / ES2024V530 / ES2023A530 / ES2024V501 / ES2027D501 Service Manual online
ORDER NO. SD0303G32C2
Epilator
ES2023
ES2024
ES2027
ES2024
ES2027
SPECIFICATIONS
Power source
AC220-240V, 50-60Hz
Power consumption
Approx. 6W
Motor voltage
12V DC
Charging time
8 hours
Weight
135g (unit with the big epilation head)
130g (unit with the sm epilation head / unit with the shaver head)
130g (unit with the sm epilation head / unit with the shaver head)
Supplied accessories
Soft case
Cleaning brush
Cleaning brush
CONTENTS
Page
Page
1 SCHEMATIC DIAGRAM ...................................................2
4 TROUBLESHOOTING GUIDE ...........................................7
2 DISASSEMBLY INSTRUCTIONS ...................................3-4
5 EXPLODED VIEW & REPLACEMENT PARTS LIST ....8-11
3 ASSEMBLY INSTRUCTIONS .........................................5-6
ES2023/2024/ES2027
2
1 SCHEMATIC DIAGRAM
ES2023/2024/ES2027
3
2 DISASSEMBLY INSTRUCTIONS
2.1 MAIN UNIT
Follow the procedure below to disassemble the main body.
1. Remove the cap and the epilation head.
Loosen two screws on top.
2. Take out the bottom cover with pushing a head release
button.
3. Separate the housing A and housing B with care to
prevent breakage of hooks.
NOTE: Make sure that there are two hooks on both side
of housing A. If open the unit with all one’s strength, it
may damage the hooks.
NOTE: Make sure that there are two hooks on both side
of housing A. If open the unit with all one’s strength, it
may damage the hooks.
ES2023/2024/ES2027
4
2.2 SHAVER HEAD(
(
(
(only for ES2027)
)
)
)
1. Remove the foil frame, inner blade and trimmer driving
bar.
NOTE: Lift the trimmer driving bar up by using
something like a slotted head screwdriver as shown in
figure with care of breakage.
NOTE: Lift the trimmer driving bar up by using
something like a slotted head screwdriver as shown in
figure with care of breakage.
2. Loosen two screws and remove the retaining plate and
dust-proof rubber.
3. Remove the blade-mounting base and take out the
driving head from the blade holder.