Read Panasonic ES-SL41A520 / ES-SL41R520 / ES-SL41S520 Service Manual online
8
5 CAUTIONS IN ASSEMBLY
NOTE:
When reassembling, replace the new waterproof rubber.
Make sure whether there is NO foreign substance sticking
around a part covered with the water seal.
Make sure whether there is NO foreign substance sticking
around a part covered with the water seal.
NOTE:
Make sure to assemble the battery last in order to avoid
short-circuited.
short-circuited.
5.1.
Motor
Place the red mark on upper side. Fit the shape of motor bal-
ancer and the hole of housing A and insert into housing A.
ancer and the hole of housing A and insert into housing A.
5.2.
Driving heads
Insert a tip pin of driving head 'B' into the hole of motor arm.
And fit the projections of housing into the hole of driving head
B.
Place a motor tip pin toward you. Insert a motor tip pin into the
hole of driving head 'A' and fit the projections of housing into
the hole of driving head A.
And fit the projections of housing into the hole of driving head
B.
Place a motor tip pin toward you. Insert a motor tip pin into the
hole of driving head 'A' and fit the projections of housing into
the hole of driving head A.
5.3.
Waterproof rubber
The waterproof rubber must be fitted the right way around.
Install as shown in figure by inserting firmly to the set position.
Install as shown in figure by inserting firmly to the set position.
5.4.
Driving bars
Set the trimmer driving bar and the slit blade driving bar.
Click on the first or last page to see other ES-SL41A520 / ES-SL41R520 / ES-SL41S520 service manuals if exist.