Read Panasonic ES-SA40 Service Manual online
5
6. Set the switch to "OFF", and remove the chassis assembly from the housing.
4.2.
Caution in Assembly
Note :
When reassembling, replace the new waterproof rubber. Make sure that there is NO foreign substance around a part covered
with waterproof rubber.
with waterproof rubber.
1. Driving Head
Insert a motor tip pin into the hole of driving head and
install driving head in chassis.
install driving head in chassis.
2. Waterproof Rubber
The waterproof rubber must be fitted properly. Install by
inserting firmly to the set position as the following Fig.
inserting firmly to the set position as the following Fig.
Click on the first or last page to see other ES-SA40 service manuals if exist.