Read Panasonic ES-LL21 / ES-LL41-K520 Service Manual online
ES-LL21/LL41
4
<TROUBLE> <CHECK>
<REMEDY>
NG
OK
NG
OK
NG
NG
Notes:
1.
After the point check , turn the main unit switch ON and OFF to check it
if it operates smoothly without any
abnormal sounds.
2.
Charge the main unit and confirm that the linear motor assembly can operates smoothly .
3.
Charge the main unit battery and check if the charge indication lamp lights up.
4.
Wire the main unit returned from a customer referring to the following figure , and connect the rated voltage to it by
the normal adaptor .
5.
Once the battery is replaced , the battery needs to be charged for a white , otherwise linear motor may not operate .
Noise is too loud.
Amplitude is too small .
Abnormal sounds.
Amplitude is too small .
Abnormal sounds.
< Check outer foil and inner blade
>
Check if there is any deformation with the outer
foil & inner blade.
Clean foil/blade perfectly applying some hand soap
because there is a possibility the bread chips cause
the problem .
foil & inner blade.
Clean foil/blade perfectly applying some hand soap
because there is a possibility the bread chips cause
the problem .
Replace the outer foil / inner
blade or oil a drop on the
outer foil / inner blade
blade or oil a drop on the
outer foil / inner blade
< Check the driving bars>
Check if there is any deformation with trimmer
driving bar , slit blade driving bar and finishing
blade driving bars or these are set firmly .
driving bar , slit blade driving bar and finishing
blade driving bars or these are set firmly .
Replace the trimmer driving
bar , slit blade driving bar
and finishing blade driving
bars
bar , slit blade driving bar
and finishing blade driving
bars
Trimmer blade knob does
not move .
not move .
Replace the trimmer handle
ON/OFF button cannot
be press.
be press.
< Check module>
Confirm if motor works when pushing the tact
switch on module .
switch on module .
See the procedure on the
above “Check module”.
above “Check module”.
Replace the housing
Switch lock cannot be set
or released .
or released .
Replace the module .
<Check driving head amplitude>
Turn the switch ON , and measure the amplitude
by checking a pin of driving head . ( See the figure
shown below. )
by checking a pin of driving head . ( See the figure
shown below. )
Replace the linear motor
assembly
assembly
Click on the first or last page to see other ES-LL21 / ES-LL41-K520 service manuals if exist.