Read Panasonic ER510-E8 Service Manual online
1 SCHEMATIC DIAGRAM
2
2 WIRING CONNECTION DIAGRAM
2
3 DISASSEMBLY INSTRUCTIONS
3
4 ASSEMBLY INSTRUCTIONS
4
2006 Works,
. and is a
of .
. and is a
of .
ER510-E8
5 TROUBLESHOOTING GUIDE
5
6 EXPLODED VIEW
7
7 REPLACEMENT PARTS LIST
8
SPECIFICATIONS
Power source
AC 230V, 50Hz
Power consumption
Approx. 16.5W
Weight
230g
Supplied accessories
10/20/30/40mm 4-Step Comb Attachment
3/6mm Comb Attachment
9/12mm Comb Attachment
Thinning Attachment
Oil
Cleaning Brush
CONTENTS
Page
Page
ORDER NO. SD0608E43CE
1 SCHEMATIC DIAGRAM
2 WIRING CONNECTION DIAGRAM
2
ER510-E8
3 DISASSEMBLY INSTRUCTIONS
Follow the procedure below to disassemble the main body.
1. Remove Attachment and Blade.
2. Remove Dust cover.
3. Loosen two screws tightening the blade springs, three screws on Housing B side and two screws on Housing C.
4. Separate Housing C and B.
5. Remove Bottom cover.
6. Take out Fan block and Housing A.
7. Remove Motor.
1. Remove Attachment and Blade.
2. Remove Dust cover.
3. Loosen two screws tightening the blade springs, three screws on Housing B side and two screws on Housing C.
4. Separate Housing C and B.
5. Remove Bottom cover.
6. Take out Fan block and Housing A.
7. Remove Motor.
3
ER510-E8
4 ASSEMBLY INSTRUCTIONS
1. Set Motor with placing the label on top. And place Switch handle with OFF position.
2. Place lead wires into the housing rib.
3. Place Plug block into Fan assembly.
4. Set Fan assembly and lead wires with care of pinching.
5. Confirm if the motor rotates when connecting the adaptor with switch ON.
6. Close Housing A and B and tighten the screws.
2. Place lead wires into the housing rib.
3. Place Plug block into Fan assembly.
4. Set Fan assembly and lead wires with care of pinching.
5. Confirm if the motor rotates when connecting the adaptor with switch ON.
6. Close Housing A and B and tighten the screws.
4
ER510-E8