Read Panasonic ER-GB80-S720 / ER-GB70-S720 / ER-GB60-K520 Service Manual online
Order Number SD1406X50CE
AC/Rechargeable Beard/Hair Trimmer
Model No.
ER-GB80
Model No.
ER-GB70
Model No.
ER-GB60
Europe
CIS
CIS
TABLE OF CONTENTS
PAGE
PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
4.1. Disassembly Instuctions --------------------------------- 4
4.2. Assembly Instructions ------------------------------------ 6
4.2. Assembly Instructions ------------------------------------ 6
5 Wiring Connection Diagram ---------------------------------- 9
6 Schematic Diagram ---------------------------------------------10
7 Exploded View and Replacement Parts List ----------- 11
6 Schematic Diagram ---------------------------------------------10
7 Exploded View and Replacement Parts List ----------- 11
7.1. Exploded View For ER-GB80 ------------------------- 11
7.2. Replacement Parts List For ER-GB80 --------------12
7.3. Exploded View For ER-GB70 -------------------------13
7.4. Replacement Parts List For ER-GB70 --------------14
7.5. Exploded View For ER-GB60 -------------------------15
7.6. Replacement Parts List For ER-GB60 --------------16
7.2. Replacement Parts List For ER-GB80 --------------12
7.3. Exploded View For ER-GB70 -------------------------13
7.4. Replacement Parts List For ER-GB70 --------------14
7.5. Exploded View For ER-GB60 -------------------------15
7.6. Replacement Parts List For ER-GB60 --------------16
ER-GB80/ER-GB70/ER-GB60
2
1 Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°). In case of using high temperature soldering
iron, please be careful not to heat too long.
iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).
2 Specifications
Power source
AC 100-240V, 50-60Hz
Motor voltage
1.2 V DC
Charging time
1 hour
Rated usable time with full-charging
50 minutes
Weight
Approx. 176g (ER-GB80, ER-GB70), Approx. 172g (ER-GB60)
Approx. 181g (Adaptor)
Supplied accessories
Comb attachment for beard : 1 - 10mm (1/32” . 13/32”)
Comb attachment for hair : 11 - 20mm (7/16” . 51/64”)
Comb attachment for body hair (Only for ER-GB80)
Pouch
Cleaning brush
Oil
ER-GB80/ER-GB70/ER-GB60
3
3 Troubleshooting Guide
ER-GB80/ER-GB70/ER-GB60
4
4 Disassembly and Assembly Instructions
4.1.
Disassembly Instuctions
1. Remove the attachment and blade.
2. Loosen two screws and remove the blade holder.
3. Press the trimmer driving bar outward. (ER-GB80 and
ER-GB70 only)
4. Loosen a screw on bottom and slide down the bottom
cover.
5. Remove the front panel together with the side panels.
NOTE:
If the front panel is removed alone, it may deform.
6. Remove the switch button.
7. Adjust the trimming height indication mark to the maxi-
7. Adjust the trimming height indication mark to the maxi-
mum [10][20] position.
Slide down the dial.
Slide down the dial.
8. Insert a slotted screwdriver to take out the clip on both
side.