Read Panasonic ER-GB40 Service Manual online
Order NO.SD1207E40CE
Rechargeable Beard/Hair Trimmer
Model No.
ER-GB40
Europe
CIS
CIS
TABLE OF CONTENTS
PAGE
PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
4.1. Disassembly Instuctions --------------------------------- 4
4.2. Cautions in Assembly ------------------------------------ 5
4.2. Cautions in Assembly ------------------------------------ 5
5 Schematic Diagram ---------------------------------------------- 7
6 Exploded View and Replacement Parts List ------------ 8
6 Exploded View and Replacement Parts List ------------ 8
6.1. Exploded View --------------------------------------------- 8
6.2. Replacement Parts List ---------------------------------- 9
6.2. Replacement Parts List ---------------------------------- 9
ER-GB40
2
1 Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70
°F (30 - 40°) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20
°F (400 ± 10°). In case of using high temperature soldering
iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100
°F / 600°C).
2 Specifications
Power source
for Europe and CIS
AC 230V, 50Hz
for the United Kingdom
AC 230-240V, 50Hz
Motor voltage
1.2 V
Charging time
RE7-69
230V-
Approx. 8 hours
RE7-74 for the United Kingdom
240V-
Approx. 8 hours
230V-
Approx. 10 hours
Weight
150g
Supplied accessories
Comb attachment
Cleaning brush
Oil
Cleaning brush
Oil
ER-GB40
3
3 Troubleshooting Guide
ER-GB40
4
4 Disassembly and Assembly Instructions
4.1.
Disassembly Instuctions
1. Remove the comb attachment.
2. Remove the blade.
2. Remove the blade.
3. Remove one screw.
4. Remove the bottom cover.
4. Remove the bottom cover.
5. Remove two screws.
6. Remove the
6. Remove the
blade holder B
and the spring for cutter.
7. Remove the blade holder A.
8. Remove the adjusting dial.
9. Remove the
front panel
.
10. Remove the seven screws.