Read Panasonic EP1510-A3 Service Manual online
ORDER NO. HPD0603A01C3
Foot Massager
EP1510-A3
Operating voltage
：AC110V 60Hz, AC220-240V 50-60Hz
(AC110V 60Hz applies only to specifications for Taiwan)
Power
consumption ：20W
Timer
：15 minutes
External
dimensions
：598mm(W)×410mm(D) ×216mm(H)
Weight
：10.5kg
CONTENTS
Page
1 DISASSEMBLY ............................................................................................................................................................................ 2
2 ACTUAL WIRING DIAGRAM ....................................................................................................................................................... 6
3 TROUBLESHOOTING ................................................................................................................................................................. 7
4 CHECKING AFTER REPAIR ....................................................................................................................................................... 8
5 EXPLODED VIEW ........................................................................................................................................................................ 9
6 REPLACEMENT PARTS LIST ..................................................................................................................................................... 10
- 2 -
1 DISASSEMBLY
1
Remove the Roller cover B from the Main body.
2
Turn the Main body upside down and remove Main
body fixing screw x 13pcs, Torx screw x 1pc, and
Roller cover installing plate screw x 16pcs.
3
Remove the Housing top, Toe parts (right-left),
Tube, and Connecting cord.
- 3 -
4
Remove the Controller panel block from the Housing
top.
5 Remove the Switch PCB, and remove the PCB
connection cord from it.
6
Remove the Toe cover with its Hooks enlarged.
7. Remove the Shaft holder from the Inside housing
and slide the Toe inside cover to remove.
8. Remove four screws on the Toe housing and
remove it.
- 4 -
9. Cut the Insulated ties on the Toe inside cover and
remove six screws and remove the Toe cover fabric
and the Toe cushion.
10. Turn over the Heatproof sheet, and remove five
screws and Main PCB.
11. Remove each screws, and remove the Pump and the
Choke coil.