Read Panasonic EH5263 / EH5264 Service Manual online
8
4.2.
Aassembly Instructions
* Refer to the WIRING CONNECTION DIAGRAM for connecting lead wires.
* Refer to the following figure for the assembly the diodes of motor block.
1. Gather the lead wires at under space of heater enclosure
as the following Fig.1.
Fig.1
2. Install the rib of air flow regulator into the gap of housing
as the following Fig.2 and Fig.3.
Fig.2 and Fig.3
3. Install the thick white lead wire of ionizing circuit block into
the gap as the following Fig.4.
Fig.4
4. Hitch the thin lead wires of the heater block around the
housing, and set those lead wires under the ionizing cir-
cuit block as the following Fig.5.
Set the thick black lead wire as the following Fig.5.
cuit block as the following Fig.5.
Set the thick black lead wire as the following Fig.5.
Fig.5
Click on the first or last page to see other EH5263 / EH5264 service manuals if exist.