Read Panasonic EH-KA81 Service Manual online
5
4.2.
Caution In Assembly
Refer to WIRING DIAGRAM to solder the wires.
1. Attach the lead wires (red for main switch and yellow for
heater) to the rectifier block from bottom. Then install rec-
tifier block on the motor block with capacitor by soldering
as shown in Figure.
tifier block on the motor block with capacitor by soldering
as shown in Figure.
2. Install the main switch on the motor block, and then insert
the black lead wires between ribs tightly. Do not allocate
the lead wires on the main switch.
the lead wires on the main switch.
3. Install the push button with coil spring and the arm switch
plate with switch plate on the housing B.
4. Install the heater motor block on the housing B. Then
insert the black lead wires between ribs.
5. Install the air inlet ring and power cord on the housing B.
6. Install the connector cover A on the housing A.
7. Put the housing A and B together.
8. Attach the filter, fixing ring and the escutcheon to the
8. Attach the filter, fixing ring and the escutcheon to the
housing.
Click on the first or last page to see other EH-KA81 service manuals if exist.