Read Panasonic EH-HW58 / EH-HW38 / EH-HW18 Service Manual online
Order Number PEWT1207A39CE
(Household) Multi-Styling Straightener
Model No.
EH-HW58
Model No.
EH-HW38
Model No.
EH-HW18
Russia
CIS
CIS
TABLE OF CONTENTS
PAGE
PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 5
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 5
4.1. Disassembly instruction---------------------------------- 5
4.2. ASSEMBLY instruction----------------------------------- 8
4.3. Lead wire of Iron Plate (Heater A , Heater B)
4.2. ASSEMBLY instruction----------------------------------- 8
4.3. Lead wire of Iron Plate (Heater A , Heater B)
and Circuit arrangement points. ----------------------- 9
5 Wiring Connection Diagram ---------------------------------10
6 Schematic Diagram ---------------------------------------------10
6 Schematic Diagram ---------------------------------------------10
7 Exploded View and Replacement Parts List ----------- 11
7.1. Exploded View for EH-HW58 ------------------------- 11
7.2. Parts List for EH-HW58--------------------------------- 12
7.3. Exploded View for EH-HW38 ------------------------- 13
7.4. Parts List for EH-HW38--------------------------------- 14
7.5. Exploded View for EH-HW18 ------------------------- 15
7.6. Parts List for EH-HW18--------------------------------- 16
7.2. Parts List for EH-HW58--------------------------------- 12
7.3. Exploded View for EH-HW38 ------------------------- 13
7.4. Parts List for EH-HW38--------------------------------- 14
7.5. Exploded View for EH-HW18 ------------------------- 15
7.6. Parts List for EH-HW18--------------------------------- 16
2
1 Warning
Caution:
- Pb free solder has a higher melting point that standard solder Typicall the melting point is 50 - 70
°F (30 - 40°C) a higher.
Please use soldering iron with temperature control and adjust it to 750 ± 20
°F (400 ± 10°C).
In case of using high temperature soldering iron, please be careful not to heat too long.
- Pb free solder will tend to splash when heated too high (about 1100
- Pb free solder will tend to splash when heated too high (about 1100
°F / 600°C).
2 Specifications
3
3 Troubleshooting Guide
Refer to WIRING CONNECTION DIAGRAM.
4