UF-490, UF-4000, UF-4100 - Panasonic Fax Service Manual (repair manual). Page 125

Read Panasonic UF-490 / UF-4000 / UF-4100 Service Manual online

125
5 Service Modes
5.1.
Service Modes (For Facsimile)
5.1.1.
Service Mode Table
The following service modes are provided to assist you in setting operational functions of the unit and
determining the condition of the unit.
Caution:
The factory default parameters are preset (destination dependent) for optimum performance and in 
compliance with the local telecommunication regulations/standards, and do not need to be changed. 
Changing some of these parameters may cause the unit to be no longer compliant or become 
inoperable.
No.
Service Mode
Description
1
Function Parameter Setting
Allows changes to the function parameters (the home position, 
etc.).
2
RAM Edit Mode
Factory use only.
3
Print Parameter List / Reports
Prints the Function Parameter List, Page Memory Test, Printer 
Report, All Document File, Protocol Trace, Toner Order Form 
and Drum Unit Order Form.
4
Modem Tests
Generates various binary, tonal and DTMF signals, by the 
modem.
5
Diagnostic
Performs various hardware tests.
6
RAM Initialization
Initialize RAM and restore the default value of the function 
parameters.
7
LBP Service Mode
Changes the Printer Parameters.
8
Check & Call
Allows input of information for Service Alert Report, 
Maintenance Alert Report, Toner Order Form and Drum Unit 
Order Form.
9
System Maintenance
Used for Firmware Update and Sending a Received File 
during a fatal printer error.
Page of 127
Display

Click on the first or last page to see other UF-490 / UF-4000 / UF-4100 service manuals if exist.