Read Panasonic KX-MB283RU / KX-MB783RU (serv.man3) Service Manual Supplement online
14
KX-MB283RU/KX-MB783RU
26
TXD2 /
I
MII Mode:
Transmit Data Input[2]
(4)
/
27
TXD3 /
I
MII Mode:
Transmit Data Input[3]
(4)
/
28
COL /
CONFIG0
Ipd/O
MII Mode:
Collision Detect Output /
Config Mode:
The pull-up/pull-down value is latched as CONFIG0
during power-up / reset. See “Strapping Options” sec-
tion for details."
during power-up / reset. See “Strapping Options” sec-
tion for details."
29
CRS /
CONFIG1
Ipd/O
MII Mode:
Carrier Secse Output /
Config Mode:
The pull-up/pull-down value is latched as CONFIG1
during power-up / reset. See “Strapping Options” sec-
tion for details."
during power-up / reset. See “Strapping Options” sec-
tion for details."
30
LED0 /
NWAYEN
Ipu/O
LED Output:
Programmable LED0 Output /
Config Mode:
Latched as Auto-Negotiation Enable (register 0h, bit
12) during power-up / reset. See “Strapping Options”
section for details.
12) during power-up / reset. See “Strapping Options”
section for details.
The LED0 pin is programmable via register 1Eh bits [15:14], and is
defined as follows.
defined as follows.
LED mode = [10]
Reserved
Reserved
LED mode = [11]
Reserved
Reserved
31
LED1 /
SPEED
Ipu/O
LED Output:
Programmable LED1 Output /
Config Mode: Latched as SPEED (register 0h, bit 13) during power-
up / reset. See “Strapping Options” section for details.
The LED1 pin is programmable via register 1Eh bits [15:14], and is
defined as follows.
defined as follows.
LED mode = [10]
Reserved
Reserved
LED mode = [11]
Reserved
Reserved
32
RST#
I
Chip Reset (active low)
PADDLE
GND
Gnd
Ground
Pin No
Pin Name
Type
(1)
Pin Function
Click on the first or last page to see other KX-MB283RU / KX-MB783RU (serv.man3) service manuals if exist.