KX-MB1500RUB, KX-MB1500RUW, KX-MB1520RUB, KX-MB1520RUW, KX-MB1500RUD - Panasonic Fax Service Manual (repair manual). Page 8

Read Panasonic KX-MB1500RUB / KX-MB1500RUW / KX-MB1520RUB / KX-MB1520RUW / KX-MB1500RUD Service Manual online

8
KX-MB1500RUB/KX-MB1500RUW/KX-MB1520RUB/KX-MB1520RUW
2.2.
Discarding of P. C. Board
When discarding P. C. Board, delete all personal information such as telephone directory and caller list or scrap P. C. Board.
2.3.
Insulation Resistance Test
1. Unplug the power cord and short the two prongs of the plug with a jumper wire.
2. Turn on the power switch.
3. Measure the resistance value with an ohmmeter between the jumpered AC plug and each exposed metal cabinet part
(screw heads, control shafts, bottom frame, etc.).
Note: Some exposed parts may be isolated from the chassis by design. These will read infinity.
4. If the measurement is outside the specified limits, there is a possibility of a shock hazard.
2.4.
Battery Caution
CAUTION
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s Instructions.
The lithium battery is a critical component (type No.CR2354). Please observe for the proper polarity and the exact location when
replacing it and soldering the replacement litium battery in.
2.5.
Laser Beam and Fuser Unit Section
• The printer of this unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
• The fuser unit is inside of the unit and gets hot. Do not touch it when removing the jammed paper or cleaning the lower glass.
Fuser Unit
Laser Scanning Unit
Laser
Caution
Label
* In case of this figure, this Laser Caution Label is located on the other side of the LSU.

Display

Click on the first or last page to see other KX-MB1500RUB / KX-MB1500RUW / KX-MB1520RUB / KX-MB1520RUW / KX-MB1500RUD service manuals if exist.

Random: