Read Panasonic KX-MB1500RUB / KX-MB1500RUW / KX-MB1520RUB / KX-MB1520RUW / KX-MB1500RUD Service Manual online
33
KX-MB1500RUB/KX-MB1500RUW/KX-MB1520RUB/KX-MB1520RUW
6.6.
CIS Control Section
The scanning block of this device consists of a control circuit and a CIS (contact image sensor), and AFE(Analog Front End) include
A/D Converter.
A/D Converter.
When an original document is inserted and the start button pressed, pin A3 of IC300 goes to a low level and the transistor Q518
turns on.
This applies voltage to the CIS. The CIS is driven by each of the signals (CCDSH, CCDCLK, Resolution) output from IC300.
The original image illuminated by the LED to output an analog image signal.
The analog image signal is input to the AFE on VINP(20pin of IC503) and converted into 16-bit data by the A/D converter inside
IC503. Then this signal undergoes digital processing in order to obtain a high-quality image.
turns on.
This applies voltage to the CIS. The CIS is driven by each of the signals (CCDSH, CCDCLK, Resolution) output from IC300.
The original image illuminated by the LED to output an analog image signal.
The analog image signal is input to the AFE on VINP(20pin of IC503) and converted into 16-bit data by the A/D converter inside
IC503. Then this signal undergoes digital processing in order to obtain a high-quality image.
Click on the first or last page to see other KX-MB1500RUB / KX-MB1500RUW / KX-MB1520RUB / KX-MB1520RUW / KX-MB1500RUD service manuals if exist.